The Curt Trunnion Style Weight Distribution System part # C24UR does come with the pictured shank. The only thing it does not come with that you will need is a hitch ball, part # 19286 for 2-5/16". view full answer...
A drum, or hub and drum, is not included along with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469.
These are 3,500 lb electric trailer brakes that fit a 10 inch drum, so if you do need a new hub and drum I have added a link below to our selection of 3,500 lb hub and drums so you can get the correct one. I have also added a link below to a video install of the # 23-468-469 brakes for you to take a look at. view full answer...
The swivel bracket # CE10200G is just the L-shaped bracket. it can attach to a bolster bracket. To get the bolster bracket with the swivel already on it you can use one of the following:
# CE10000G, 9 inches tall
# CE10001G, 11 inches tall
# CE10002G, 13 inches tall
There are also sets of 4:
# CE10000G-4
# CE10001G-4
# CE10002G-4
I have also included a link to the bolster brackets we carry with and without swivel brackets attached. view full answer...
Yes. The CE Smith Post Style Guide Ons # CE27640 does come with U-bolts, brackets and nuts needed to mount these guide ons on trailer frames up to 3" wide x 4-1/4" tall.
If you need longer U-bolts you can use the 5-1/4" tall, 2 extra-long U-bolt kits # CE11416.
I've attached a photo that shows everything that is included with this kit. view full answer...
For Curt trailer hitch # C12038 you will get the trailer hitch itself and the hardware needed to install it. The other parts you need depend on what you're going to use the htich for.
If you're going to be carrying a cargo carrier or bike rack you also need a support strap # 18050 per Curt's warranty.
If you plan on towing a trailer you need to add ball mount # C45503 along with the properly sized ball and the wiring. Those items are not included with the hitch. For a 1-7/8 inch ball... view full answer...
The end cap that comes with the Replacement Black Handle for Ram Sidewind Jacks # HDKB-BLK isn't available on it's own so you'll have to get the handle with it. view full answer...
The Bulldog Winch Quick-Connect Set part # BDW20047 only comes with one cover/plug. The reason for this is because the side attached to the battery would still be live which is the side you would use the plug on as water could get into the connector and cause corrosion issue. The other side would not be powered therefore corrosion issues would not be possible. If you wanted, you could coat the pins with dielectric grease part # 11755 but a cover is not available separately nor is it needed. view full answer...
The Curt # C12070 does not come with a receiver plug, but you can add the etrailer Rubber Hitch Cover for 1-1/4" Trailer Hitches - Qty 1 # 22281. view full answer...
Yes. The MORryde Sliding Tray for RV Cargo Compartment - 90" x 36" - 800 lbs - 2 Way # MR38FR does come with mounting hardware included. I've linked a photo of the included hardware for you to have a look at. view full answer...
The Erickson Adjustable Ratcheting Wheel Net # EM58522 is a single tie-down strap. It offers a safe working load limit (WLL) of 3333-lbs and can be used with any tire size from 14- to 29-inches.
Straps should always be chosen according to their safe working load limit (WLL). The item being towed must not exceed the WLL of the strap being used. To determine the maximum load, or break strength, of the tow strap, simply multiply the WLL by 3. The WLL is always one-third (1/3) of the maximum load. view full answer...
The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White # MA00-05100K does not come with a wall switch, but the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K will work with it. Keep in mind this does not have the power lift.
If you want the power lift, Then the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White # MA00-07000K is what you want which comes with the remote... view full answer...
When you purchase the replacement hardware kit for your TracRac Ladder Rack part # TH27000XT it should come with the following:
4 Steel pocket nuts
(8) 3/8" Long safety bolts
(4) 3" Long socket-head cap screws
30 Plastic access plugs
6 Nylon Washers
But the rubber expansion blocks # TARB-11032-1 that go into your truck bed stake pockets you will need to purchase separately. view full answer...
According to Thule, there is a handle on the Thule Xadapt1 Rapid Aero, AeroBlade and Xsporter Load Bar Adapter # Xadapt1.
It consists of a fastener plate, two spacers, cam handle, two square head bolts, a nut, and a barrel nut. It will work with AeroBlade crossbars, but is only for Thule V2, Thule V2 Recumbent, and Thule Sidearm Roof Mounted Bike Racks.
The correct adapter for the Thule Peloton bike rack is the Thule Load Bar Adapter for Peloton and Echelon Bike Racks # THXADAPT9. view full answer...
For your Exmark lawn mower with the 5" opening you actually just need the Rack'em Grass Catcher # RCMMS4-EXS15. This comes with the carrying handle as well as a face plate for a 5" discharge opening so neither of those would be extra.
If you'd like to add an extension we also carry that as part # RLES25. view full answer...
With the Roadmaster tow bars like the Sterling # RM-576 or the Falcon # RM-520 the crossbar you mentioned is included. The only Roadmaster tow bar that doesn't come with the bar is the one designed for Blue Ox base plates, part # RM-525. view full answer...
The Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black # 311-SWFA06A29, which fits on your 2020 Ford F-150, weighs about 70-lbs, so it's effect on the payload is minimal. The installation/removal process is also relatively easy because of the lighter weight for a retractable cover and should take about 10 mins. view full answer...
The etrailer Magnetic Hitch Receiver Reducer Sleeve # e28JR does not include a locking hitch pin. I recommend the Flint Hill Goods Locking Hitch Pin for 2" and 2-1/2" Hitches # FHG63VR, which just so happens to be the locking pin in the picture you referenced. This is a chrome plated steel locking pin which will work perfectly to keep hitch accessories secured to your hitch. A dust cap and two keys are included. view full answer...